Ultra Tile ProClean Grout Aid
1 Litre
UltraTile ProClean Grout Aid is a final rinse additive aiding easy rinse and clean off of mortar grout and cement grouting residues. It helps to eliminate common problematic grout film and hazing. Grout Aid Plus significantly reduces grout haze drying on the surface; this will greatly reduce post installation problems such as patchy grout colours and efflorescence blooming.
Ultra Tile ProClean Grout Aid will only neutralise cement grout residues it is not designed to remove grout polymer film issues. To deal with those issues we would recommend using UltraTile ProClean Resin-Off.
- Final rinse additive for easy wash-down
- Eliminates grout haze
- Suitable for all acidic resistant surfaces
- Use on ceramic tiles, porcelain, brick, clay and quarry tiles, terracotta, concrete and other types of natural stone
- Internal & external use
- Simply add to water
- 1 litre bottle
| Suitable Surface & Substrates | Ceramic, Porcelain, Quarry Tile, Terracotta, Sandstone, Slate, Granite |
| Size | 1 Litre |
| Application Amount | 1 - 2 Applications |
| Application Method | Sponge or Cloth |
| Coverage | 100m2 per litre (dependant on dilution and rate used) |
| Range | UltraTile ProClean |
| Supplier | Instarmac |
How do I apply Ultra Tile ProClean Grout Aid?
Always wear rubber or latex gloves when using this product. The easiest way to apply Ultra Tile ProClean Grout Aid is by using a flat sponge or cloth.
Directions For Use:
1) Always perform a test in an inconspicuous area on-site to check suitability of product, prior to use - read these instructions fully before application.
2) Always use rubber or latex gloves when using this product.
3) Add 100-200ml per 5 litres of final rinsing water in a bucket. Mix well. Proceed to use as normal with a grouting sponge or tiler’s washboy to clean.
4) Allow to dry (2-5mins). On rough or textured tiles, it may be necessary for a second wash down.
5) If using Grout Aid indoors ensure good ventilation during and after use.
