Availability: GOOD AVAILABILITY
Only %1 left
Rubi Porcelain Tiles Continuous Rim Diamond Cutting Blade [CPR]
SKU
CPRCON
From
£45.59
£37.99
High speed air-cooled blade for straight, dry cuts in porcelain. For use with direct connection to a 4½" angle grinder. The Rubi CPR SuperPro is recommended for cutting of fine porcelain wall & floor tiles with less than 20mm thickness.
- For angle grinder
- Vacuum brased
- For porcelain
- Fine diamond grit
- Continuous rim
- Standard M14 thread
- No water required
| Outside Diameter | 115mm, 125mm |
| Inside Diameter | 22.2mm |
| Disc Segment High | 7mm |
| Segment Thickness | 1.7mm |
| Max RPM | 12,250 rpm, 13,000 rpm |
| Type | Diamond tile Blade |
| Suitable Sawing Material | Porcelain |
| Brand | Rubi |
Can I use this for mitre cuts?
Its reduced thickness allows you to make straight cuts at high speed, but, on the other hand, it is not recommended for mitre cuts. Blades with thicknesses of less than 2 mm are not suitable for mitre cuts.
Can this be used when wet cutting?
No, the Turbo type CPR diamond blade by Rubi combines high performance with high cutting speed and excellent finishes, but it is a dry cutting blade.
Write Your Own Review
