Lithofin Splash Stop Water Based Impregnator [UNI]
This hydrophobic impregnator provides excellent water repellence and is solvent free. Quick and easy to apply the treated surfaces stay clean for longer and are easier to maintain. Water and dissolved dirt particles no longer penetrate the material and remain on the surface. The product is UV resistant and does not yellow.
- Surface remains 'breathable'
- Does not change the appearance
- Tolerant to residual moisture
| Size | 1L, 5L |
| pH Value | Approx. 13 |
| Solubility in Water | Soluble |
| Storage | Keep closed and cool for up to 2 years |
| Brand | Lithofin |
How do I use Lithofin Splash Stop?
The surface must be absorbent, clean and dry. Suitable tools: brush, roller or sprayer. Evenly apply the product and allow it to penetrate the surface. Large areas should be treated in smaller sections. On very absorbent surfaces, a second application (wet in wet) is required. Avoid puddles and streaks and remove any product excess by towelling them off after 10 minutes. The treated surface must not be rained on for 8 hours.
Please Note: Non absorbent surfaces (e.g. glazed or wet surfaces) cannot be treated with Lithofin Splash Stop W. The drier the surface to be treated is, the better the results will be. For optimal effectiveness, the surface must be completely dried out. Do not use when surface temperatures exceed 25°C. Glass, polished finishes, synthetics, and similar sensitive surfaces must be protected against splashes.
How much coverage do I get per litre?
Approx. 10 to 25 m²/L
