The Tile/Glass Carbide Tipped Drill Bit ÿ 6mm designed with a carbide tip and a simple flute-less shaft, which is especially suitable for drilling through soft-to-medium hard tiles such as glazed ceramic wall and floor tiles. Drill without impact at low speeds.
- Tungsten Carbide Tip Reduces Slip & Wandering
- No Cooling Required
- Drill suitable for glass and glazed ceramic tiles
| Size | 6mm |
| Material | Tungsten Carbide |
| Type | Tile Drill |
| Pack Quantity | 1 Supplied |
| Brand | Genesis |
What speed should these drills be used at for ceramic tiles?
You should use a slow speed with these drill bits to avoid cracking the tiles.
Is it necessary to stick masking tape to the tile before drilling?
As long as the surface is lubricated upon drilling this will not be a necessary thing to do.
Write Your Own Review
