| Unit 5, Meadowbrook Park, Holbrook, Sheffield, S20 3PJ   Visit Our Showroom
Call us on:
0114 251 1523
Only %1 left

Genesis Aluminator Heavy Duty Aluminium Retro Straight Edge Nosings - DDA Compliant

From £45.00 £37.50

In addition to the function of step edge protection the Aluminator™ range offers an easy, energy efficient solution to illuminate steps. Should a local or emergency power failure occur on stairways, increasing the risk of hazard for evacuees, the Aluminator™ system allows the evacuee to orientate, locate stair edges and risers, and so can assist in the safe evacuation of the premises.

Main Features:

  • Suitable for external use.

  • Suitable for both commercial and domestic applications where public safety is paramount.

  • The diverse range can be used on a wide variety of substrates such as concrete, timber, tiles, vinyl, steel and checker plate with inserts available in a wide array of colours.

  • Highly durable.

  • Slip-resistant silicon carbide.

  • The system requires no electrical connection, is simple to install and requires no special maintenance other than that which you would normally carry out on any similar product.

  • Only normal illumination, daylight, fluorescent or standard tungsten filaments are required to activate its performance.

Length 1m, 2.46m, 2.77m
Width 72mm
Depth 55mm
Channel Single
Type Heavy Duty
Design Straight
Gauge (mm) 5
Material Aluminium

How do i install this product?

  1. Ensure the steps are dry, clean, free of debris, level and even.

  2. If Predrilled use the drill holes to mark steps for drilling location.

  3. Drill and Plug the steps.

  4. Apply suitable adhesive to the underside of the nosing and apply nosing to the step.

  5. Screw down the step with the appropriate size screws.

  6. Apply insert (if separate) or insert pip to cover the screw head.

Write Your Own Review
You're reviewing:Genesis Aluminator Heavy Duty Aluminium Retro Straight Edge Nosings - DDA Compliant