Dural DUROSOL Straight Edge Solid Brass Tile Trim
2.5 Metre Length
Dural DUROSOL Straight Edge Solid Brass Tile Trim is designed to provide a protective edge as well as a decorative finish when applied to floor or wall tiles, coverings, and other substrates. These tile edging trims are suitable for both domestic and commercial installation.
These classy solid brass profiles offer an elegant border, due to the nature of thier surface which is available in either natural brass or chrome finish. These tile edging trims are supplied in 2.5 Metre lengths and are supplied in a wide range of trim sizes ranging from 3mm to 50mm in depth.
Typical applications for a Dural DUROSOL Straight Edge Solid Brass Tile Trim may include edge protection for tiles that are bordered by carpets, expansion joints or as a decorative edging for stairs.
When choosing the depth of your Dural DUROSOL Solid Brass Tile Trim we recommend allowing an extra 2mm of depth for the bed of adhesive beneath the tile being applied e.g. a 10mm deep tile trim would ideally be fitted with an 8mm deep tile, with a 2mm bed of adhesive beneath it.
Dural solid brass tile trims create a stylish and aesthetical finish as well as an effective protective edge when installed with all kinds of floor tiles, wall tiles and base substrates.
Dural tile trims are supplied with a transparent protective film offering added protection during transport, storage and installation.
Main Features:
- Solid Brass Material
- Classic L Shape Profile
- Punched FlangeBase For superior Tile Adhesion
- 2.5 Metre Length
- Hard wearing surface
- Also available in Polished Chrome Finish
- 10mm or 12mm Trim Depth Options
- Tile Edge Protection
- Commercial and Industry Specified
- Protective Transport Film
Available Trim Depth Sizes:
- 3mm Depth (Recommended for substrates upto 2mm depth)
- 4.5mm Depth (Recommended for substrates upto 3mm depth)
- 6mm Depth (Recommended for 4mm depth tiles)
- 8mm Depth (Recommended for 6mm depth tiles)
- 9mm Depth (Recommended for 7mm depth tiles)
- 10mm Depth (Recommended for 8mm depth tiles)
- 11mm Depth (Recommended for 9mm depth tiles)
- 12.5mm Depth (Recommended for 10mm depth tiles)
- 15mm Depth (Recommended for 13mm depth tiles)
- 18.5mm Depth (Recommended for 16mm depth tiles)
- 20mm Depth (Recommended for 18mm depth tiles)
- 22mm Depth (Recommended for 20mm depth tiles)
- 25mm Depth (Recommended for 23mm depth tiles)
- 27.5mm Depth (Recommended for 25mm depth tiles)
- 30mm Depth (Recommended for 28mm depth tiles)
- 40mm Depth (Recommended for 38mm depth tiles)
- 50mm Depth (Recommended for 48mm depth tiles)
Suitable For:
- Floors & Walls
- Dividing Tiles
- Edge Protection
- Feature Border Trim
- Vertical Feature Trim
- Horizontal Feature Trim
Key Areas of Use:
- Internal Living Areas
- Bathrooms
- Kitchens
- Hallways
- Lounges
- External Areas
- Patios
| Trim Material | Solid Brass |
| Trim Depths Available | 3mm, 4.5mm, 6mm, 8mm, 9mm, 10mm, 11mm, 12.5mm, 15mm, 18.5mm, 20mm, 22mm, 25mm, 27.5mm, 30mm, 40mm, 50mm |
| Length | 2.5 Metre |
| Width | 23mm |
| Finish | Natural Brass, Polished Chrome |
| Handling & Storage | Stored and handled from original packaging, Protective film |
| Suitable Tile Depth Information | Tile Depth + upto 2mm Adhesive = Trim Depth |
| Weight | 0.4kg |
| Accreditations | industry specified |
How do I fit Dural DUROSOL Straight Edge Solid Brass Tile Trim ?
To fit Dural solid brass tiling trims, ensure that the base of the tile being applied is positioned onto the widest part of the trim which has perforated sections to allow for tile adhesive to pass through. Position the flat inside edge of the tile trim against the side of the tile and the thinnest top edge should be flush with the front face of the tile.
How do you cut Dural DUROSOL Straight Edge Solid Brass Tile Trim ?
We recommend using a Mitre block tool and a hand saw with our tile trims to acheive an accurate clean cut. you can find more information about mitre blocks and our cutting tools in the related products section at the bottom of the page.
Can I fit these tile trims outside ?
Yes, we actually recommend that stainless steel tile trims to be used for external tile or paving installations instead of aluminium due to thier durable nature and resistance to extreme wear and tear.
What products do I use to clean my tile trim ?
No specific cleaning products are required to maintain and clean your metal tile edging trim. We simply recommend using a soft cloth or duster and a everyday cleaning product like polish to remove any smears, stains or finger prints.
How do I know which tile trim size will fit my tiles?
To work out the required tile trim depth to fit your tiles we recommend the following. First measure the depth of your tile in mm and then add an extra 2mm onto this measurement to allow for your tile adhesive. This calculation will provide you with the correct trim depth for your tiles. e.g. 8mm tile depth + 2mm adhesive = 10mm deep tile trim.
How do I work out how many lengths of trim I will need ?
The easiest way to work out how many tiling trim lengths you will need is to measuring the length and height of the tiled area with a tape measure and add these measurements together. This calculation should give you the overall amount of tile trim required in linear metres. These trims are specifically supplied in 2.7 Metre lengths offering better coverage for large tiled areas.
