Genesis Round Edge Stainless Steel Tile Trim
2.5 Metre Length
Established in 1989 in the ceramic and accessories market, Genesis quickly became a leading brand in the UK and around the world and have gone from strength to strength since. When it comes to tile trims, corners and end caps, Genesis has it all. Check out the range of Genesis products below to see which one will help you complete your current tiling project. As a leading global brand, Genesis provides innovative tile finishing solutions for professional tilers, DIY enthusiasts, and contractors.
The Genesis Round Edge Stainless Steel Tile Trim is manufactured from either 304 or 316 grade stainless steel making it ideal to acheive a strong seamless edge on porcelain tiles, ceramic tiles and various other wall or floor substrates.
This tiling trim is designed to be used where high levels of hygiene are required, such as food processing, breweries, dairies and hospitals. They offer superb resistance to principal chemical and atmospheric agents.
Available in various trim depths these stainless steel tile trims work great with all kinds of tiled areas and can be used with great effect to produce a stunning metalic edge or stylish wall feature.
The tiling trim we supply is 2.5 Metres in length and is available in either a polished stainless steel or natural stainless steel finish.
When choosing the depth of your Genesis Round Edge Stainless Steel Tile Trim we recommend allowing an extra 2mm of depth for the bed of adhesive beneath the tile being applied e.g. a 10mm deep tile trim would ideally be fitted with a 7-8mm deep tile, with a 2mm bed of adhesive beneath it.
Genesis round Edge Stainless Steel Tile Trim is suitable for external use and recommended where there is a heavy level of wear and tear or where a high level of surface protection is required.
Where appropriate, trims are supplied with transparent protective film offering added protection during transport, storage and installation.
- High Quality Stainless Steel - Grade 304 or 316
- Round Shape Profile
- Punched FlangeBase For superior Tile Adhesion
- 2.5 Metre Length
- Hard wearing surface
- Available in Polished Stainless Steel or Brushed Stainless Steel Finish
- 4 Trim Depth Options
- Tile Edge Protection
- Commercial and Industry Specified
- Protective Transport Film
Available Trim Depth Sizes:
- 6mm Depth (Recommended for 4mm depth tiles)
- 8mm Depth (Recommended for 6mm depth tiles)
- 10mm Depth (Recommended for 8mm depth tiles)
- 12mm Depth (Recommended for 10mm depth tiles)
- Floors & Walls
- Dividing Tiles
- Edge Protection
- Feature Border Trim
- Vertical Feature Trim
- Horizontal Feature Trim
Key Areas of Use:
- Internal Living Areas
- External Areas
- Hospitality, Restaurants, Hospitals, Commercial
|Trim Material||Stainless Steel (Grade 304 & Grade 316)|
|Trim Depths Available||6mm, 8mm, 10mm, 12mm|
|Width||23mm - 29mm|
|Finish||Polished Stainless steel, Brushed Stainless Steel|
|Handling & Storage||Stored and handled from original packaging, Protective film|
|Suitable Tile Depth Information||Tile Depth + upto 2mm Adhesive = Trim Depth|
How do I fit Genesis Round Edge Stainless Steel Tile Trim ?
To fit Genesis stainless steel tiling trims, ensure that the base of the tile being applied is positioned onto the widest part of the trim which has perforated sections to allow for tile adhesive to pass through. Position the flat inside edge of the tile trim against the side of the tile and the thinnest top edge should be flush with the front face of the tile.
How do you cut Genesis Round Edge Stainless Steel Tile Trim ?
We recommend using a Genesis Mitre block tool and a hand saw with our tile trims to achieve an accurate clean cut. you can find more information about mitre blocks and our cutting tools in the related products section at the bottom of the page.
Can I fit these tile trims outside ?
Yes, we actually recommend that stainless steel tile trims to be used for external tile or paving installations instead of aluminium due to their durable nature and resistance to extreme wear and tear.
What products do I use to clean my tile trim ?
No specific cleaning products are required to maintain and clean your metal tile edging trim. We simply recommend using a soft cloth or duster and a everyday cleaning product like polish to remove any smears, stains or finger prints.
How do I know which tile trim size will fit my tiles?
To work out the required tile trim depth to fit your tiles we recommend the following. First measure the depth of your tile in mm and then add an extra 2mm onto this measurement to allow for your tile adhesive. This calculation will provide you with the correct trim depth for your tiles. e.g. 8mm tile depth + 2mm adhesive = 10mm deep tile trim.
How do I work out how many lengths of trim I will need ?
The easiest way to work out how many tiling trim lengths you will need is to measuring the length and height of the tiled area with a tape measure and add these measurements together. This calculation should give you the overall amount of tile trim required in linear metres. Our trims are usually supplied in either 2.5 Metre or 2.7 Metre lengths offering better coverage for large tiled areas.