| Unit 5, Meadowbrook Park, Holbrook, Sheffield, S20 3PJ   Visit Our Showroom
                  
Availability: GOOD AVAILABILITY

Genesis Contour Edge Aluminium Tile Trim

2.5 Metre length

SKU
TDGCON
From £10.86 £9.05 inc. VAT

Genesis

Established in 1989 in the ceramic and accessories market, Genesis quickly became a leading brand in the UK and around the world and have gone from strength to strength since. When it comes to tile trims, corners and end caps, Genesis has it all. Check out the range of Genesis products below to see which one will help you complete your current tiling project. As a leading global brand, Genesis provides innovative tile finishing solutions for professional tilers, DIY enthusiasts, and contractors.

A versatile Aluminium profile. TDG is an alternative to an ordinary straight edge profile, the TDG offers a more luxurious finish to any edge. It can be used as an edge trim on the vertical with wall tiles or on the horizontal with Floor tiles or even as a feature strip in wall or floor applications. The extruded Aluminium profile gives a square appearance when installed with a slight bevelled edge for a smooth finish and is also available with corner pieces (ECG) to obviate sharp edges when mitring is necessary. Where appropriate, trims are supplied with transparent protective film offering added protection during transport, storage and installation. Available in bespoke powder coating to any RAL number on request.

Main Features:

  • Industry recognised brand
  • Robust metal aluminium
  • Contour edge Profile
  • Perforated installation base for superior adhesion
  • 2.5 metre length
  • Hard wearing surface
  • Matt silver or bright silver finishes
  • 3 trim depth options
  • Protects tile edges
  • Custom RAL finish option Available

Available Trim Depth Sizes:

  • 8mm Depth (Recommended for 6mm depth tiles)
  • 10mm Depth (Recommended for 8mm depth tiles)
  • 12mm Depth (Recommended for 10mm depth tiles)

Suitable For:

  • Floors & Walls
  • Dividing Tiles
  • Edge Protection
  • Feature Border Trim
  • Vertical Feature Trim
  • Horizontal Feature Trim

Key Areas of Use:

  • Internal Living Areas
  • Bathroom
  • Kitchen
  • Hallway
  • Lounge
  • Dining Areas
  • Conservatories

Trim Material Anodised Aluminium
Available Trim Depths 8mm, 10mm, 12mm
Available Trim Lengths 2.5 Metre
Width 18mm + Depth
Available Finishes Matt Silver, Bright Silver
Handling & Storage Stored and handled from original packaging, Protective film
Suitable Tile Depth Information Tile Depth + upto 2mm Adhesive = Trim Depth
Weight 0.3kg
Accreditations Aluminium AA 6063 T6 / UNS A96063 anodised to DIN 17611

How do I fit Genesis Contour Edge Aluminium Tile Trim ?

To fit Genesis tiling trims, ensure that the base of the tile being applied is positioned onto the widest part of the trim which has perforated sections to allow for tile adhesive to pass through. Position the flat inside edge of the tile trim against the side of the tile and the thinnest top edge should be flush with the front face of the tile.

How do you cut Genesis Contour Edge Aluminium Tile Trim ?

We recommend using a Genesis Mitre block tool and a Genesis hand saw with these tile trims to acheive an accurate clean cut. you can find more information about Genesis mitre blocks and Genesis cutting tools in the related products section on the left of the page.

What products do I use to clean my tile trim ?

No specific cleaning products are required to maintain and clean your metal tile edging trim. We simply recommend using a soft cloth or duster and a everyday cleaning product like polish to remove any smears, stains or finger prints.

How do I know which tile trim size will fit my tiles?

To work out the required tile trim depth to fit your tiles we recommend the following. First measure the depth of your tile in mm and then add an extra 2mm onto this measurement to allow for your tile adhesive. This calculation will provide you with the correct trim depth for your tiles. e.g. 8mm tile depth + 2mm adhesive = 10mm deep tile trim.

How do I work out how many lengths of trim I will need ?

The easiest way to work out how many tiling trim lengths you will need is to measuring the length and height of the tiled area with a tape measure and add these measurements together. This calculation should give you the overall amount of tile trim required in linear metres. Our trims are usually supplied in either 2.5 Metre or 2.7 Metre lengths offering better coverage for large tiled areas.

Write Your Own Review
You're reviewing:Genesis Contour Edge Aluminium Tile Trim