Genesis Angle Edge Stainless steel Tile trim
2.5 Metre Length
Established in 1989 in the ceramic and accessories market, Genesis quickly became a leading brand in the UK and around the world and have gone from strength to strength since. When it comes to tile trims, corners and end caps, Genesis has it all. Check out the range of Genesis products below to see which one will help you complete your current tiling project. As a leading global brand, Genesis provides innovative tile finishing solutions for professional tilers, DIY enthusiasts, and contractors.
- High Quality Stainless Steel
- Angled Edge Profile
- Punched FlangeBase For superior Tile Adhesion
- 2.5 Metre Length
- Hard wearing surface
- Natural Stainless Steel Finish
- 3 Trim Depth Options
- Tile Edge Protection
- Commercial and Industry Specified
- Protective Transport Film
Available Trim Depth Sizes:
- 4.5mm Depth (Recommended for substrates upto 3mm depth)
- 7mm Depth (Recommended for 5mm depth tiles)
- 10mm Depth (Recommended for 8mm depth tiles)
- Floors & Walls
- Dividing Tiles
- Edge Protection
- Corner Edges
Key Areas of Use:
- Internal Living Areas
- External Areas
- Hospitality, Restaurants, Hospitals, Commercial
|Trim Material||Stainless Steel|
|Trim Depths Available||4.5mm, 7mm, 10mm|
|Finish||Natural Stainless Steel|
|Handling & Storage||Stored and handled from original packaging, Protective film|
|Suitable Tile Depth Information||Tile Depth + upto 2mm Adhesive = Trim Depth|
How do I fit Genesis Angle Edge Stainless Steel Tile Trim ?
To fit Genesis stainless angle edge steel tiling trims, ensure that the base of the tile being applied is positioned onto the widest part of the trim which has perforated sections to allow for tile adhesive to pass through. Position the flat inside edge of the tile trim against the side of the tile and the thinnest top edge should be flush with the front face of the tile.
How do you cut Genesis Angle Edge Stainless Steel Tile Trim ?
We recommend using a Genesis Mitre block tool and a hand saw with our tile trims to achieve an accurate clean cut. you can find more information about mitre blocks and our cutting tools in the related products section at the bottom of the page.
What products do I use to clean my tile trim ?
No specific cleaning products are required to maintain and clean your metal tile edging trim. We simply recommend using a soft cloth or duster and a everyday cleaning product like polish to remove any smears, stains or finger prints.
How do I know which tile trim size will fit my tiles?
To work out the required tile trim depth to fit your tiles we recommend the following. First measure the depth of your tile in mm and then add an extra 2mm onto this measurement to allow for your tile adhesive. This calculation will provide you with the correct trim depth for your tiles. e.g. 8mm tile depth + 2mm adhesive = 10mm deep tile trim.
How do I work out how many lengths of trim I will need ?
The easiest way to work out how many tiling trim lengths you will need is to measuring the length and height of the tiled area with a tape measure and add these measurements together. This calculation should give you the overall amount of tile trim required in linear metres. Our trims are usually supplied in either 2.5 Metre or 2.7 Metre lengths offering better coverage for large tiled areas.