Trimtraders Square Edge Aluminium Tile Trim
2.5 Metre Length
The Trimtraders Square Edge Aluminium Tile Trim is a unique tiling trim manufactured from high quality anodised aluminium which makes it perfect for acheiving a seamless edge on all types of porcelain tiles, ceramic tiles and other materials of varying depths.
The tiling trim we supply is 2.5 Metres in length and is available in either a Brushed Silver or bright polished silver finish.
When choosing the depth of your Trimtraders Square Edge Aluminium Tile Trim we recommend allowing an extra 2mm depth for the bed of adhesive beneath the tile, e.g. a 10mm deep tile trim would ideally be fitted with an 8mm deep tile, with a 2mm bed of adhesive beneath it.
Trimtraders aluminium tile trims create a stylish aesthetical finish as well as an effective protective edge when installed with all kinds of floor tiles, wall tiles and base substrates.
Main Features:
- High Quality Anodised Aluminium
- Unique Box Shape Design
- Perforated installation Base For superior Adhesion
- 2.5 Metre Length
- Hard wearing surface
- 2 Stylish Finish Options
- 2 Trim Depth Options
- Protects Tile Edges
Available Trim Depth Sizes:
- 9.5mm Depth (Recommended for 8mm depth tiles)
- 12.5mm Depth (Recommended for 10mm depth tiles)
Suitable For:
- Floors & Walls
- Dividing Tiles
- Edge Protection
- Feature Border Trim
- Vertical Feature Trim
- Horizontal Feature Trim
Key Areas of Use:
- Internal Living Areas
- Bathroom
- Kitchen
- Hallway
- Lounge
| Trim Material | Anodised Aluminium |
| Available Trim Depths | 9.5mm, 12.5mm |
| Length | 2.5 Metre |
| Width | 23mm |
| Available Finishes | Bright Silver, Brushed Silver |
| Handling & Storage | Stored and handled from original packaging, Protective film |
| Suitable Tile Depth Information | Tile Depth + 2mm Adhesive = Trim Depth |
| Weight | 0.3kg |
| Accreditations | Aluminium AA 6063 T6 / UNS A96063 anodised to DIN 17611 |
How do I fit Trimtraders Square Edge Aluminium Tile Trim ?
To fit our tiling trims, ensure that the base of the tile being applied is positioned onto the widest part of the trim which has perforated sections to allow for tile adhesive to pass through. Position the flat inside edge of the tile trim against the side of the tile and the flat top edge should be flush with the front face of the tile.
How do you cut Trimtraders Square Edge Aluminium Tile Trim ?
We recommend using a Mitre block tool and a hand saw with our tile trims to acheive an accurate clean cut. you can find more information about mitre blocks and our cutting tools in the related products section at the bottom of the page.
What products do I use to clean my tile trim ?
No specific cleaning products are required to maintain and clean your metal tile edging trim. We simply recommend using a soft cloth or duster and a everyday cleaning product like polish to remove any smears, stains or finger prints.
How do I know which tile trim size will fit my tiles?
To work out the required tile trim depth to fit your tiles we recommend the following. First measure the depth of your tile in mm and then add an extra 2mm onto this measurement to allow for your tile adhesive. This calculation will provide you with the correct trim depth for your tiles. e.g. 8mm tile depth + 2mm adhesive = 10mm deep tile trim.
How do I work out how many lengths of trim I will need ?
The easiest way to work out how many tiling trim lengths you will need is to measuring the length and height of the tiled area with a tape measure and add these measurements together. This calculation should give you the overall amount of tile trim required in linear metres. Our trims are usually supplied in either 2.5 Metre or 2.7 Metre lengths offering better coverage for large tiled areas.
