| Unit 5, Meadowbrook Park, Holbrook, Sheffield, S20 3PJ   Visit Our Showroom
                  
 
Call us on:
0114 251 1523
Availability: GOOD AVAILABILITY
Only %1 left

Genesis Slim Angle Aluminium Tile Trim

2.5 Metre Length

SKU
EADCON
From £8.54 £7.12

EAD is an Aluminium profile for 90 degree external corners, with only a 2mm seen edge it offers a minimalistic design and discreet finishing edge. One flange offers anchoring positions to secure the profile during and after installtion, it is the perfect compliment to mitred tiles offering protection with a modern finish.

Main Features:

  • Aluminium metal
  • Angled edge profile
  • punched flanged base for superior tile adhesion
  • 2.5 metre length
  • Hard wearing surface
  • Silver or brass finishes
  • 3 trim depth options
  • Tile edge protection
  • Protective transport film

Available Trim Depth Sizes:

  • 8mm Depth (Recommended for 6mm depth tiles)
  • 10mm Depth (Recommended for 8mm depth tiles)
  • 12mm Depth (Recommended for 10mm depth tiles)

Suitable For:

  • Floors & Walls
  • Dividing Tiles
  • Edge Protection
  • Corner Edges

Key Areas of Use:

  • Internal Living Areas
  • Bathrooms
  • Kitchens
  • Hallways
  • Lounges

Trim Material Anodised Aluminium
Trim Depths Available 8mm, 10mm, 12mm
Length 2.5 Metre
Width 18mm + Depth
Finish Bright Silver, Bright Brass
Handling & Storage Stored and handled from original packaging, Protective film
Suitable Tile Depth Information Tile Depth + upto 2mm Adhesive = Trim Depth
Weight 0.2kg
Accreditations Industry specified

 

How do I fit Genesis Slim Angle Aluminium Tile Trim ?

To fit Genesis tiling trims, ensure that the base of the tile being applied is positioned onto the widest part of the trim which has perforated sections to allow for tile adhesive to pass through. Position the flat inside edge of the tile trim against the side of the tile and the thinnest top edge should be flush with the front face of the tile.

How do you cut Genesis Slim Angle Aluminium Tile Trim ?

We recommend using a Genesis Mitre block tool and a Genesis hand saw with these tile trims to acheive an accurate clean cut. you can find more information about Genesis mitre blocks and Genesis cutting tools in the related products section on the left of the page.

What products do I use to clean my tile trim ?

No specific cleaning products are required to maintain and clean your metal tile edging trim. We simply recommend using a soft cloth or duster and a everyday cleaning product like polish to remove any smears, stains or finger prints.

How do I know which tile trim size will fit my tiles?

To work out the required tile trim depth to fit your tiles we recommend the following. First measure the depth of your tile in mm and then add an extra 2mm onto this measurement to allow for your tile adhesive. This calculation will provide you with the correct trim depth for your tiles. e.g. 8mm tile depth + 2mm adhesive = 10mm deep tile trim.

How do I work out how many lengths of trim I will need ?

The easiest way to work out how many tiling trim lengths you will need is to measuring the length and height of the tiled area with a tape measure and add these measurements together. This calculation should give you the overall amount of tile trim required in linear metres. Our trims are usually supplied in either 2.5 Metre or 2.7 Metre lengths offering better coverage for large tiled areas.

Write Your Own Review
You're reviewing:Genesis Slim Angle Aluminium Tile Trim