Genesis Anti-Slip Safety Tape
Available in 63mm or 115mm Wide x 635mm Length Strips
NIW standard anti slip tape is made from a fine grade aluminium oxide, which makes it suitable for use in a wide range of applications. The grit is a medium anti slip abrasive
coating. Our standard NIW is great for general anti slip requirements possessing excellent levels of grip (measured as
Coefficient of Friction) and it is suitable for both inside and outside use.
Main Features:
-
Very tough and extremely durable
-
Ease of application.
-
Withstands most chemicals that are present in commercial environments.
-
Will adhere to most surfaces if installed correctly.
-
High levels of Coefficient of friction (this is how grip is measured)
| Available Finshes | Black, Yellow, Hazard |
| Length | 18.3m |
| Width | 63mm, 115mm |
How do i install this product?
-
Clean surface thoroughly ensuring removal of any contamination that may prevent the adhesion of the tape. (N.B. It is important to remember that the safety strip will only stick to surfaces that are smooth and free from dirt and grease).
-
Cut the tape to length required.
-
Peel of backing film and place firmly into place. Do not attempt to reposition once the initial adhesion has taken place.
-
If applied externally, the edges must be sealed.
