Lithofin Splash Stop Impregnator [UNI]
Lithofin Splash Stop is for rendering facades and other surfaces made from natural stone (e.g. sand stone, granite, limestone) and quarry tiles, engineered stone and concrete water and dirt resistant. Suitable for indoor and outdoor use. Lithofin Splash stop penetrates into porous surfaces and forms a thin coat inside the capillaries. This coat prevents the penetration of water and dirt, forcing it to remain on the surface. Surfaces stay clean longer and become easier to maintain. The water permeability is hardly affected. The appearance of the surface is not, or only slightly, altered. Lithofin Splash Stop is UV-resistant and does not yellow.
- Invisible
- Matte
- Surface remains 'breathable'
| Size | 1L, 5L |
| Drying Time | Approx. 40 minutes (at room temperature) |
| Storage | Keep closed, cool and dry for up to 4 years |
| Solubility in Water | Not Soluble |
| Coverage | Approx. 7 to 15 m²/L |
| Brand | Lithofin |
How much coverage do I get per litre with this product?
Depending on the surface.
- Sandstone: approx. 1 to 4m² per litre
- Quarry tiles: approx. 5 to 8m² per litre
- Rough granite: approx. 10 to 15m² per litre
How do I apply this prodcut?
The surface to be treated must be absorbent, clean and completely dry. Generously apply a consistent amount of Lithofin Splash Stop with a brush or roller. In case of very absorbent materials, repeat the application after approx. 30 to 40 minutes. Avoid puddles, drips and foam. Do not allow the product to dry on the surface. Immediately distribute and remove surface residues with a cloth.
