Ultra Tile ProClean Tile & Grout Sealer
1 Litre Tin
UltraTile ProClean Tile & Grout Sealer is a premium, non flammable impregnating sealant that offers excellent stain protection against oil and water spills with a low odour, UV stable, colourless and nonyellowing appearance.
UltraTile ProCelan Tile & Grout Sealer can be applied to damp stone and grout immediately after installation with this fast track formula. It penetrates to protect all types of natural stone surfaces, i.e. travertine, terracotta, limestone, marble, granite, sandstone and many other porous stone surfaces such as plain or exposed aggregate concrete, slate, concrete pavers etc.
- Natural matt finish impregnating stone sealer
- Protects tile and grout against oil and water stains
- Professional stain protection
- Suitable for interior and exterior use
- Low odour, non flammable formula
- Premium grade breathable sealer
- 1 litre tin
| Suitable Surface & Substrates | Tiles & Grout, Sandstone, Granite, Limestone, Marble, Slate, Porcelain, Travertine, Porous, Teracotta, Quarry Tile |
| Size | 1 Litre Tin |
| Application Amount | 2 - 3 Coats |
| Application Method | Sprayer, Sponge, Brush, Pad or Cloth |
| Coverage | Up to 25m2 per coat (internal use) 5-8m2 (external application) |
| Range | UltraTile ProClean |
| Supplier | Instarmac |
How do I apply Ultra Tile ProClean Tile & Grout Sealer?
It is strongly recommended when using coloured grouts that a stain test is completed before proceeding. During application care should be taken to protect adjacent areas & equipment from over-spray with masking materials. The surface should be sectioned off to assist accurate coverage. Do not allow to puddle. Under normal conditions it will be touch dry within 1-2 hours and may be walked upon after 4 hours.
Directions For Use:
1) Always perform a test in an inconspicuous area on-site to check suitability of product, prior to use - read these instructions fully before application.
2) Use without thinning down. Surfaces should be clean, dry & free from oil, grease, dust, and any other debris. Do not apply in temperatures below 5°C or above 25°C and should not be subjected to extremes of temperature until completely dry.
3) Apply a generous, even coat of Tile and Grout Sealer to the surface and edges of the stone using a roller, sponge, lint free cloth or brush. Ensure even distribution by wiping over several times, remove any surface sealer that has not penetrated the tile or stone after 15-20 minutes.
4) Apply a second coat, allowing a minimum of 30-45 minutes drying between coats, repeat the process and remove any excess sealer from the applied area with a dry lint free cloth. It will take up to 24 hours before the product will offer full protection. Until this has happened, keep the surface free from water and oil spills, as stains may occur before fully cured.
