Lithofin Wax Off dissolves organic dirt such as wax, oil, grease, tar, fresh paint, sealants, care product residues, etc. and allows them to be removed with water. It is ideal for removing oily and greasy dirt deposits from solvent resistant surfaces such as natural and concrete stone, ceramics, clay and quarry tiles, concrete, etc. Suitable for indoor and outdoor use. As well as being suitable for removing elastic joints (silicone). Available in 1L bottle or 5L canister.
- Ready-to-use
- Fast acting
- Leaves no residues
| Solubility in Water | Emulsifiable |
| Odour | Aromatic, Orange-like |
| Size | 1L, 5L |
| Shelf Life | Up to 4 Years |
| Storage | Keep cool, closed and dry. |
| Brand | Lithofin |
How do I use Lithofin Wax Off?
Apply Lithofin Wax Off undiluted to the dry surface and distribute evenly. Work in small controlled sections. Allow the product to work for 5 to 20 minutes, brushing occasionally. Do not allow to dry. When all deposits are dissolved, add some water, brush and remove the solution from the surface. On large surfaces use a squeegee or a wet and dry vac. Always rinse well with clear water. In case of stubborn deposits, repeat this procedure when the surface has dried. Please Note: the surface temperature must not exceed 25°C. Switch off under floor heating. Solvent sensitive surfaces such as rubber, paint, varnish, linoleum, asphalt, some plastics, etc. must be protected against splashes. Always try the product in an inconspicuous area prior to use.
Will this remove paint drips from natural stone tiles?
Yes, put some Lithofin Wax Off (undiluted) on the spot. Allow the product to work for 10 to 15 minutes, brushing occasionally. Then rinse the surface with plenty of clear water.
What is the coverage like for this product?
Approx. 7 to 15m² depending on type and stubbornness of the deposits.
