| Unit 5, Meadowbrook Park, Holbrook, Sheffield, S20 3PJ   Visit Our Showroom
                  
 
Call us on:
0114 251 1523
Availability: GOOD AVAILABILITY
Only %1 left

Lithofin Splash Stop Impregnator [UNI]

SKU
LTSPLCON
From £30.17 £25.14

Lithofin Splash Stop is for rendering facades and other surfaces made from natural stone (e.g. sand stone, granite, limestone) and quarry tiles, engineered stone and concrete water and dirt resistant. Suitable for indoor and outdoor use. Lithofin Splash stop penetrates into porous surfaces and forms a thin coat inside the capillaries. This coat prevents the penetration of water and dirt, forcing it to remain on the surface. Surfaces stay clean longer and become easier to maintain. The water permeability is hardly affected. The appearance of the surface is not, or only slightly, altered. Lithofin Splash Stop is UV-resistant and does not yellow.

  • Invisible
  • Matte
  • Surface remains 'breathable'

Size  1L, 5L
Drying Time Approx. 40 minutes (at room temperature) 
Storage  Keep closed, cool and dry for up to 4 years
Solubility in Water Not Soluble
Coverage Approx. 7 to 15 m²/L
Brand Lithofin

How much coverage do I get per litre with this product?

Depending on the surface.

  • Sandstone: approx. 1 to 4m² per litre
  • Quarry tiles: approx. 5 to 8m² per litre
  • Rough granite: approx. 10 to 15m² per litre

How do I apply this prodcut?

The surface to be treated must be absorbent, clean and completely dry. Generously apply a consistent amount of Lithofin Splash Stop with a brush or roller. In case of very absorbent materials, repeat the application after approx. 30 to 40 minutes. Avoid puddles, drips and foam. Do not allow the product to dry on the surface. Immediately distribute and remove surface residues with a cloth.

Write Your Own Review
You're reviewing:Lithofin Splash Stop Impregnator [UNI]