Lithofin MPP [PRO] is formulated for the professional user. This product is for touching up dull patches and for renewing worn off polishes on marble. Lithofin MPP is a polishing powder based on oxalates and special additives and transforms calcium particles in the surface of the stone making them easy to polish so the surface once again has a high gloss finish.
- No fumes
- Based on oxalic acid
| Volume | 1L |
| Coverage | Up to 40 m²kg |
| Storage | Keep closed, cool and dry for up to 4 years |
| Brand | Lithofin |
How do I use Lithofin MPP [PRO]?
Preparation: The surface to be treated must be clean and free of polymers, acrylates and wax layers. Use Lithofin MN Power Clean or Lithofin Wax-Off to thoroughly clean the surface.
For touching up small surfaces or patches it is possible to polish by hand. This will only lead to a lower level of gloss; it is preferable to use a polishing machine. On smaller surfaces we recommend polishing machines with approx. 1000 rpm. For floors, a one disc polishing machine with approx. 140 to 180 rpm, 40 to 50 kg, pressure of approx. 0,37 N/cm² to 0,52 N/cm² is necessary. Always use a white nylon polishing pad. Optimal results can be achieved on surfaces with a 300 to 400 polish. Treat larger surfaces in segments of max. 10 to 15m².
Execution: Wet the surface with plenty of water. Spread a small quantity of Lithofin MPP and immediately start polishing. When the product turns pasty, add some water and continue polishing until the desired gloss level is reached. Then immediately rinse the surface with Lithofin MN Power Clean diluted 1:10 to 1:20 and remove the solution with a wet and dry vac or cloth. Do not allow any product residues to remain on the surface. Advice: it may be advisable to wet the surface with Lithofin MN Power Clean rather than with water. This reduces the risk of matt stains due to splashes on already polished surfaces. On small areas, Lithofin MPP can be mixed with Lithofin MN Power-Clean to form a paste, which is easier to use.
