Lithofin Stain-Stop Eco [MN]
![](https://trimtraders.co.uk/media/aw_sbb/brand/Lithofin.jpg)
Lithofin Stain-Stop ECO [MN] is a highly active water and oil repellent polymers which is easy to apply tile sealer. The treatment prevents the immediate penetration of water based dirt as well as oil and grease, and it provides an effective protection against staining. It is a ready to use stone sealer and virtually odourless. Appropriate for polished, honed and rough surfaces. Suitable for both indoor and outdoor use. This protective impregnator does not alter a stone’s sensitivity to acids. It can be used as initial protection before grouting and as a pre-treatment.
- For interior and exterior use
- Matte
- Low on odour
Volume | 1L, 5L |
Coverage | Approx. 4 to 8m²/L |
Drying Time | Approx. 3 hours. Treatment is fully effective after 48 hours. Do not cover surface before then and wipe up any spills immediately. |
Storage | Keep closed, cool and dry for up to 4 years |
Brand | Lithofin |
Can this be used to seal a limstone fireplace surround?
Yes, this is suitable for use on all absorbent natural stones, especially suitable for rough and honed limestone (e.g. Mocca Creme, Cabouca and similar materials).
How do I apply this product?
Apply generously and evenly using a lambswool applicator, roller, lint free cloth or sponge. Ensure even distribution by wiping over several times. Make a second application after approx. two hours. Ensure that all surface residues are removed after 15 mins by towelling them off, do not allow residues to dry on the surface. On highly absorbent surfaces, apply product several times. Do not wait for surface to dry in between these applications. Check the surface for an even finish after the last application.