| Unit 5, Meadowbrook Park, Holbrook, Sheffield, S20 3PJ   Visit Our Showroom
                  
 
Call us on:
0114 251 1523
Availability: GOOD AVAILABILITY
Only %1 left

Genesis Aluminator Heavy Duty Aluminium Rakeback Edge Nosings - DDA Compliant

SKU
AHD24CON
From £43.22 £36.02

In addition to the function of step edge protection the Aluminator® range offers an easy, energy efficient solution to illuminate steps. Should a local or emergency power failure occur on stairways, increasing the risk of hazard for evacuees, the Aluminator® system allows the evacuee to orientate, locate stair edges and risers, and to assist in the safe evacuation of the premises. The system requires no electrical connection, is simple to install and requires no special maintenance other than that which you would normally carry out on any similar product. Only normal illumination, daylight, fluorescent or standard tungsten filaments are required to activate its performance.

Tredsafe insert is manufactured from a special blend of P.V.C., silica quartz and polymeric plasticiser giving a homogeneous hard wearing anti-slip flooring for wet and dry conditions.

Main Features:

  • Good Anti-Slip Properties

  • Simple To Install

  • High Quality Aluminium 

  • 16 Finish Options

  • Available in 1m, 2.46m & 2.77m Lengths

  • Highly durable.

  • Slip-resistant silicon carbide.

  • The system requires no electrical connection, is simple to install and requires no special maintenance other than that which you would normally carry out on any similar product.

  • Only normal illumination, daylight, fluorescent or standard tungsten filaments are required to activate its performance.

Length 1m, 2.46m & 2.77m
Width 60mm
Depth 55mm
Channel Single
Type Heavy Duty
Design Rakeback
Gauge 5mm
Material Aluminium

How do i install this product?

  1. Ensure the steps are dry, clean, free of debris, level and even.

  2. If Predrilled use the drill holes to mark steps for drilling location.

  3. Drill and Plug the steps.

  4. Apply suitable adhesive to the underside of the nosing and apply nosing to the step.

  5. Screw down the step with the appropriate size screws.

  6. Apply insert (if separate) or insert pip to cover the screw head.

Write Your Own Review
You're reviewing:Genesis Aluminator Heavy Duty Aluminium Rakeback Edge Nosings - DDA Compliant