Genesis Aluminium Bullnose Tile-In Nosings
![](https://trimtraders.co.uk/media/aw_sbb/brand/Genesis.jpg)
Genesis NAT is an attractive slender profile designed to enhance the step installation and protect the edge of the floor covering from impact damage. It also provides a little grip on the edge of the step to prevent slipping. The flange sits underneath flat tile and also forms a locking locator for the riser tile. The neat rounded face highlights the edge of the step as well as protecting it. Available in bespoke powder coating to any RAL number on request.
-
High quality aluminum
-
Attractive slender profile
-
2 Colour Finish Options
-
2 Trim Depth Options
Finish | Matt silver, bright silver |
Length | 2.6m |
Depth | 10mm, 12mm |
Brand | Genesis |
How do i install this product?
When installing with Tile Adhesive this should offer adequate fixing, however, if required most tile in nosings offer a mechanic fixing method using 5mm holes within the flange making them suitable for Wood and Laminate floors that do not require Tile adhesive.
1. Check the fit of the nosing and ensure the profile is the correct height and width for the step and floorcovering.
2. Install the floorcovering on the riser.
3. Place the nosing firmly on the step and if necessary mark the floor.
4. Drill and Plug the floor if Mechanically fixing.
5. Apply the adhesive using a suitable notched trowel to the manufacturers recommendations.
6. Bed the profile into the adhesive ensuring that the adhesive comes through all the flange holes, spread the adhesive over the top of the flange before installing tiles.
7. A grout gap is not required however if visible ensure that grout is compressed firmly within the gap
Does this product require any maintenance?
Genesis NAT profiles do not require any special maintenance. Oxidation films on Aluminium may be removed with a common polishing agent.