| Unit 5, Meadowbrook Park, Holbrook, Sheffield, S20 3PJ   Visit Our Showroom
                  
 
Call us on:
0114 251 1523
Availability: GOOD AVAILABILITY
Only %1 left

Genesis Stainless Steel Tile-In Ramp

2.5 Metre Length

SKU
RSSCON
From £31.01 £25.84

Genesis RSS ramps are designed to provide a neat, clean transition from two-floor coverings of different heights. Simple to install and providing a perfect safe secure finish to the flooring installation.

  • Simple to install
  • Provides a perfect safe secure finish to the flooring installation
  • Strong and durable corrosion-resistant stainless Steel
RSS104 - 20mm x 10mm - 2.5m
RSS124 - 25mm x 12.5mm - 2.5m

Finish Stainless Steel
Length 2.5m
Width 20mm, 25mm
Depth 10mm, 12.5mm
Brand Genesis

How do I install this product?

  1. Ensure that the profile depth (d) is correct for the flooring material.
  2. Line up the profile along the join between the ttwo-floorcoverings and cut to length desired.
  3. Press the perforated anchoring leg of the profile onto the floor and align, mechanical fix if required or simply push into the floor covering adhesive allowing this to perforate the flange of the profile.
  4. Use additional adhesive over the perforated anchoring leg to ensure full coverage if necessary.
  5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile. The profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
  6. Fill the joint completely with grout.
Write Your Own Review
You're reviewing:Genesis Stainless Steel Tile-In Ramp