Genesis Brushed Stainless Steel Pre-Drilled Floor Covers
A range of brushed stainless steel pre-drilled floor cover strips that provides a bridge to cover joints between floorcoverings of the same or slightly differing heights e.g. carpet and carpet tiles, it ensures that joins are neat and safe aswell as protecting the exposed edges of the floor coverings.
-
Mechanically fix with 3.5mm self tapping screws.
-
Pre drilled / countersunk Stainless Steel profile to ease the transition between two floor coverings of the same level.
- Available in 2.7m Lengths profile widths 30 &
40mm pre-drilled and countersunk.
| Finish | Brushed stainless steel |
| Length | 2.7m |
| Width | 30mm, 40mm |
| Fixing | Pre-drilled |
| Brand | Genesis |
How Do I Install These?
-
Measure and cut profile to the desired length
-
Position profile and mark the points to be drilled
-
Reposition the profile and mechanically fix with 3.5mm self tapping screws
Does this product require any maintenance?
Tarnish or Water Stains:
The first stage of corrosion is completely on the surface and is easily removed by most
commercial metal polishes. Discoloration will be greater at indoor facilities due to the chlorine vapor trapped in an inside environment.
Lightning Rusting:
Rust is visible at this stage but little or no pitting has yet occurred. A stronger cleaning agent is required.
Heavy Rusting:
A deep coat of rust with surface pitting can develop if corrosion has been left unchecked for a long time.
