Availability: GOOD AVAILABILITY
Only %1 left
Genesis TCR Fast Fit Slimline Aluminium Floor Transition
SKU
TCRFFCON
From
£6.42
£5.35
The Genesis Fast Fit Slimline Aluminium Floor Transition is a rounded cover profile that features an innovative hidden fixing mechanism, and is available in various metalic finishes. Due to the pivot system incorporated into the fixing system the TCR profile will accommodate height differentials of between 9mm up to 18mm. So it’s ideal for use where most hard floor coverings meet a smooth vinyl or carpet type floor covering.
-
Provides a neat and clean transition from two floor coverings of different heights
-
Simple to install
-
Can accommodate a maximum height variance of 18mm.
-
Available in 0.92m or 1.85m lengths and
40mm widths
| Finish | Matt Silver, Bright Silver, Pewter, Bright Brass, Matt brass |
| Length | 0.92m, 1.85m |
| Width | 40mm |
| Fitting | Dowel Fitting (Dowels included) |
| Brand | Genesis |
How Do I Install These?
- Ensure that the TCR profile width cover the
gap between the two floor coverings and
that the two floor coverings are level. - Simply drill a 6ø hole in the floor at 25-30cm
intervals for 1.85m and 15-20cm for the
0.92m to depth of approx 2-3cm. Starting
approximately 5 cm in from each end. - Secure the PVC fixing plugs onto the top
cover section of the profile, simply slide them
along the profile by locking the top square
section into the runner on the underside of
the profile, lining them up with the pre drilled
holes in the floor. - Push the screws into the holes, gently apply
hand pressure lowering the profile into
position and if required tap the cover section
with a rubber mallet thus locking the profile
into place and securing both floor coverings.
Write Your Own Review
