Availability: GOOD AVAILABILITY
Only %1 left
Genesis Fast Fit Slimline Aluminium Floor Transition
![](https://trimtraders.co.uk/media/aw_sbb/brand/Genesis.jpg)
SKU
TCSCON
From
£6.48
£5.40
Genesis TCS is an Aluminium Cover and PVC base two-part system designed to provide a neat, clean transition from two floor coverings of equivalent heights. It also provides an excellent cover where an expansion gap has been left or is desired between the floor coverings. Simple to install the TCS provides a perfect safe secure finish to the flooring installation.
-
Pre-drilled / countersunk Stainless Steel profile to ease the transition between two floor coverings of the same level.
-
Made from high-quality aluminium.
-
Genesis TCS profiles do not require any special maintenance.
-
Dowels included.
Finish | Matt Silver, Matt Brass |
Length | 0.92m, 1.85m |
Width | 40mm |
Fitting | Dowel Fixed (Dowels included) |
Brand | Genesis |
How Do I Install These?
- Ensure that the TCS profile width cover the
gap between the two floor coverings and
that the two floor coverings are level. - Simply drill a 6ø hole in the floor at 25-30cm
intervals for 1.85m and 15-20cm for the
0.92m to depth of approx 2-3cm. Starting
approximately 5 cm in from each end. - Secure the PVC fixing plugs onto the top
cover section of the profile, simply slide them
along the profile by locking the top square
section into the runner on the underside of
the profile, lining them up with the pre drilled
holes in the floor. - Push the screws into the holes, gently apply
hand pressure lowering the profile into
position and if required tap the cover section
with a rubber mallet thus locking the profile
into place and securing both floor coverings
Write Your Own Review