| Unit 5, Meadowbrook Park, Holbrook, Sheffield, S20 3PJ   Visit Our Showroom
                  
 
Call us on:
0114 251 1523
Availability: GOOD AVAILABILITY
Only %1 left

Kerakoll Fugabella Color Silicones

SKU
FUGCOLSICON
From £9.82 £8.18

Decorative sealant for grouting of ceramic and porcelain tiles, mosaic and natural stone in a 50-color design range. Green product for bio-building. High-performance grouting of joints from 0 to 20 mm, with a smooth finish, a high degree of hardness, water-repellence with water-drop effect. Silicone Color develops a high degree of adhesion to non-absorbent surfaces, guaranteeing the integrity and watertightness of ceramic and porcelain coverings subject to deformation.

  • Anti‑mould
  • High chromatic stability
  • Resistant to freezing
  • Ideal to seal porcelain and ceramic tiles

Appearance Coloured Thixotropic Paste
Shelf Life ≈ 24 months
Pack  310 ml Cartridge
Curing Time ≥ 20 min.
Temperature Range For Application From +5 °C to +40 °C
Joint Minimum Width ≥ 6 mm
Joint Max Width ≤ 25 mm
Colour  50 Fugabella® Colours Available 
Brand Kerakoll

Can this silicone be painted over?

No, Kerakoll Silicone Color is non-paintable.

Do I need to use a base coat before applying this product?

A base coat is normally not necessary. Specific substrates (porous or made of plastic materials) may require the use of Keragrip Eco Pulep ecofriendly adhesion promoter to ensure maximum adhesion. 

Best way to apply Kerakoll Color Silicone?

Silicone Color is ready-to-use. After cutting the conical nozzle of the cartridge, cut the spout at an angle of 45° to suit the width of the seal to be realized and screw it onto the cartridge. Then insert the tube of silicone into the appropriate manual or pneumatic applicator gun, start sealant extrusion and fill the joint. Areas close to joints must be protected with masking tape to prevent substrates from being contaminated and to ensure even sealing. Remove masking tape immediately after smoothing the sealant. Make sure the silicone has been compacted deep into the joints to ensure optimum adhesion. To achieve a perfect finish, pass a metal or plastic spreader soaked in soapy water over the surface in one, continual movement if possible.

Write Your Own Review
You're reviewing:Kerakoll Fugabella Color Silicones