| Unit 5, Meadowbrook Park, Holbrook, Sheffield, S20 3PJ   Visit Our Showroom
                  
 
Call us on:
0114 251 1523
Availability: GOOD AVAILABILITY
Only %1 left

Genesis Fast Fit Slimline Aluminium Floor Transition

SKU
TCSCON
From £6.48 £5.40

Genesis TCS is an Aluminium Cover and PVC base two-part system designed to provide a neat, clean transition from two floor coverings of equivalent heights. It also provides an excellent cover where an expansion gap has been left or is desired between the floor coverings. Simple to install the TCS provides a perfect safe secure finish to the flooring installation.

  • Pre-drilled / countersunk Stainless Steel profile to ease the transition between two floor coverings of the same level.

  • Made from high-quality aluminium.

  • Genesis TCS profiles do not require any special maintenance.

  • Dowels included.

Finish Matt Silver, Matt Brass
Length 0.92m, 1.85m
Width 40mm
Fitting Dowel Fixed (Dowels included)
Brand Genesis

How Do I Install These? 

  1. Ensure that the TCS profile width cover the
    gap between the two floor coverings and
    that the two floor coverings are level.
  2. Simply drill a 6ø hole in the floor at 25-30cm
    intervals for 1.85m and 15-20cm for the
    0.92m to depth of approx 2-3cm. Starting
    approximately 5 cm in from each end.
  3. Secure the PVC fixing plugs onto the top
    cover section of the profile, simply slide them
    along the profile by locking the top square
    section into the runner on the underside of
    the profile, lining them up with the pre drilled
    holes in the floor.
  4. Push the screws into the holes, gently apply
    hand pressure lowering the profile into
    position and if required tap the cover section
    with a rubber mallet thus locking the profile
    into place and securing both floor coverings
Write Your Own Review
You're reviewing:Genesis Fast Fit Slimline Aluminium Floor Transition