Instarmac ProRapid PB Rapid Set Tile Adhesive
Instarmac ProRapid PB Rapid Set Tile Adhesive is a rapid setting, cementitious wall and floor adhesive with extended workability. It is ideal for both interior and exterior applications. It has increased bond strength and enhanced performance due to polymer modification. It is able to take light foot traffic within 3 hours of installation depending upon temperature and substrate.
- Ideal for use with ceramic, mosaic and natural stone tiles
- Fast setting
- 3-12mm bed thickness
- 60 minutes pot life
- 2 hours set time
| Weight | 20kg |
| Colour | Grey |
| Set Time | 2 Hours |
| Pot Life | 60 Mins |
| Bed Thickness | 3 - 12mm |
| Range | Ultra Tilefix |
| Brand | Instarmac |
How long after application can I begin the grouting process?
Leave the installed tiles for a minimum period for at least 3 hours to set hard before grouting and/or walking on the tile. This time may be extended on impervious/non-porous substrates. It is also dependent on temperatures and conditions. Always check and ensure that adhesive has set hard before grouting.
How much water should I use?
Instarmac ProRapid PB Rapid Set Tile Adhesive Mixing Ratio: 20kg unit requires 4.2L - 4.5L of water.
